MasterHeat Wire is easily sized for any project.

• New Water-Proof Outer Jacket
• Now U.L. Approved for Showers
• Tough Stainless Steel Ground Braid
• Single-point Connection

Evaluate how many square feet of floor are to be heated.

Do not put under cabinets or appliances.

Generally, about 85-90% of the open areas should be heated.

Leave the wire at least 4" away from the toilet wax ring and 4"-6" away from your walls.

To keep toes warm, install right up to the toe-kick in front of kitchen or bath cabinets, and in front of a toilet, shower, or tub.

MasterHeat Coated Wire is easily sized for any project.

• Evaluate how many square feet of floor are to be heated. Do not put under cabinets or appliances. Generally, about 85-90% of the open areas should be heated. Leave the wire at least 4" away from the toilet wax ring and 4"-6" away from your walls. To keep toes warm, install right up to the toe-kick in front of kitchen or bath cabinets, and in front of a toilet, shower, or tub.

• Choose a "spacing factor" of 2", 2-1/2", or 3" on center. Below are guidelines for application and spacing recommendations.

• 2" on center = 15 Watts/sq. ft. Use on concrete basement slabs, sunrooms, and in other high heat loss areas.

• 2-1/2" on center = 12 Watts/sq. ft. Use in bathrooms, kitchens, dining/living areas, etc.

• 3" on center = 10 Watts/sq. ft. Use in hallways, entries, low heat loss areas, etc.

MasterHeat Coated Wire is made the same as MasterHeat Wire, but has an additional tough, water proof outer jacket.

• Oxygen-free heating elements
• ETFE insulation
• Stainless Steel ground braid
• New red outer jacket
• Approved for showers

Coated Electric Wire Spools