Let our Controllers do all the work for you: |
|
MasterHeat Non-Programmable 120/240V FloorStat
The most obvious change in our new non-programmable control is that it is now digital. However, behind the digital
face of our new MasterHeat controls are nearly all of the same features as our new programmable model:
• 15’ floor sensor included
• Dual Voltage: 120 and 240 VAC
• Built-in 15-amp Relay
• Built-in GFCI (5 milliamp trip)
• “Masterstat” capability
• Connects directly to MasterHeat Relay
• Floor, air, or air & floor temperature modes
• “Regulator” operation without sensor attached |
• Temperature Range: 40°F - 99°F (4° - 37°C)
• Display in degree F or degree C
• Large Back-lit Display
• Keyboard Lockout
• Manual On/Off Switch
• Home automation remote control
• System usage monitoring |
|
|
MasterHeat Programmable 120/240V FloorStat
The new MasterHeat Programmable is, by far, the most sophisticated electric floor warming control available.
It incorporates an amazing variety of function and elegance into one thermostat:
• 15’ floor sensor included
• Dual Voltage: 120 and 240 VAC
• Built-in 15-amp Relay
• Built-in GFCI (5 milliamp trip)
• “Masterstat” capability
• Connects directly to MasterHeat Relay
• SmartStart Technology
• 5/1/1 Day Programming
• Four Preset Program Schedules
• One User Program Schedule |
• ENERGY STAR® qualified
• Floor, air, or air & floor temperature modes
• “Regulator” operation without sensor attached
• Display in degree F or degree C
• Temperature Range: 40°F - 99°F (4° - 37°C)
• Large Back-lit Display
• Keyboard Lockout
• Manual On/Off Switch
• Home automation remote control
• System usage monitoring |
|
|
MasterHeat Relay - Control System 120/240v
If a mat or cable system requires more than 15 amps, we recommend installing MasterHeat Relays. Relays connect
directly to MasterHeat thermostats for simple, elegant control of larger systems.
MasterHeat Relays don’t require a special
“master thermostat”, as before. Relays are dual voltage (120 VAC or 240 VAC), have a 15-amp capacity, an on/off switch,
a GFCI and test light.
It’s possible to control over 1500 sq.ft. of electric floor warming using 120 VAC and over 3,000 sq.ft. using 240 VAC floor
warming mats or cables.
|
 Click here for our MasterHEAT T-Stat Installation Instructions
See our MasterHEAT Pricing page for itemization & ordering information
|
