|
Extra Thermostat Sensor Wire for 120/240V Thermostat
Thermostat Sensor Wire.
|
|
MasterHeat Mat and Wire Monitor
Its a must for every job. The mat and wire monitor monitors MasterHeat Mats, wire, or UnderFloor heating elements during the entire installation process and sounds an alarm if the heating elements are cut or damaged, allowing for easy repair before the heating elements are covered with finished flooring or insulation. The mat and wire monitor gives you the assurance of a quality installation. Features include 9-volt battery power, on/off switch, green light to indicate operation, red light to indicate damage to heating elements, test button to verify proper operation, and a very loud alarm. |
|
MasterHeat Plastic Trowel for In Floor Heat
Most instances of damage to the heating wire occur when a metal trowel is banged onto the floor to remove excess mortar. A metal trowel can cut like a knife and either damage or totally sever the wire. The plastic trowel simply cannot damage the wire. For added peace of mind, consider using the new 3/8 x 3/8 notched plastic trowel to apply thin-set mortar.
|
|
MasterHeat Extra Power Lead 120v
Contact us to order additional power leads. Mats come standard with 10' leads, but can have up to a maximum of 50'. PRICE IS PER FOOT.
|
|
MasterHeat Repair Kit for Mats & Wire
This simple and safe kit repairs heating elements that have been damaged or severed during installation. This kit is suitable for all MasterHeat floor-warming products. Kit includes materials to make one repair: 2 black jumper wires, 1 ground jumper wire, 2 ground solder tubes, and 4 heating wire solder tubes. Detailed written instructions are included.
|
|
MasterHeat 25' Strap
MasterHeat strap is used to hold the heating cables in place at the desired spacing. Cut using ordinary tin snips. Order one 25-ft.-long coil per 4050 sq. ft. of heated floor area.
|
 See our MasterHEAT Pricing page for itemization & ordering information
|
