Fasteners and Tools for all your needs
	Basic Tubing Cutter All-metal construction makes this basic tubing cutter superior to the plastic kinds.
	Battery-Powered Crimp and Press Power Tool Kit This industrial tool uses forged steel jaws to crimp RadiantPEX or Press RadiantPEX-AL fittings. Jaws change out in seconds on the jobsite. Kit includes cordless tool, one battery, and a steel storage case. Crimp and Press Jaws are sold separately. This cordless crimp power tool kit is available on a rental basis. Call Watts Radiant or your local distributor for rental information.
	Cable Ties
	Clip Tie ClipTies are delivered in sets of 12.
	CrimpAll Tool Kit Interchangeable crimping jaws make the CrimpAll Tool Kit a great value. One tool kit allows crimping of multiple sizes of RadiantPEX. The 15” CrimpAll Kit has four crimping jaws: 3/8”, 1/2”, 5/8”, and 3/4”. The larger 19” CrimpAll Kit gives more leverage for crimping 1” and 1-1/4” PEX and fittings. A tough plastic case helps keep all the crimping tools in one place. The kit includes the CrimpAll tool, interchangeable jaws, a Go/No-Go crimp gauge, and adjustment tools. Note, the jaws for the 15” tool are not interchangeable with the 19” tool. Also, the CrimpAll can only be used for fastening crimp rings over crimp fittings and RadiantPEX tubing. Do not use it for press fittings or RadiantPEX-AL tubing as the connection will leak.
	CrimpMaster Tool The CrimpMaster is a smaller, more compact crimping tool. The tool arms only need to open 6", making it easy to get into tight spaces. Buy one tool for each size of PEX fittings
	CrimpRing Go/No-Go Gauge The CrimpRing Go/No-Go Gauge is used to check for a proper crimp connection.
	Electric Corded Crimp and Press Power Tool Kit This industrial tool uses forged steel jaws to crimp RadiantPEX or press RadiantPEX-AL tubing and fittings. Jaws change out in seconds on the jobsite. Kit includes corded crimp tool and steel storage case. Crimping or Pressing Jaws sold separately. This corded power tool kit can be rented. Call Watts Radiant or your local distributor for rental information.
	Extra Power Tool Battery Extra Power Tool Battery – for Cordless Crimp and Press Tool
	Extruded Aluminum PEX Plates These plates are an extruded aluminum plate measuring 3-1/2” wide by 4 and 8 ft. long. Tubing snaps into channel, making installation fast and easy. The channel’s tight grip eliminates annoying ticks and clicks as the PEX expands and contracts.
	Foamboard Stapler and Staples For installing radiant tubing in slab-on-grade or slab-over-slab applications. The Foamboard Stapler is designed to staple 3/8” and 1/2” Onix, and 3/8” to 3/4” PEX, and 1/2” or 5/8”RadiantPEX-AL to a wide variety of foam insulation boards. The stapler comes fully assembled and uses both sizes of plastic staples. Use the shorter staples for 1” insulation boards, and the longer staples for 2” (or thicker) insulation boards. The Foamboard Stapler holds up to 120 staples. Reduce pipe installation time and increase productivity
	Mid-Run Bend Supports Mid-run Bend Supports — for bending RadiantPEX or RadiantPEX-AL without kinking Mid-run Bend Supports help PEX make 90° turns in walls and joist cavities. These can also be used as Terminal Bend Supports. 1/2” mid-run supports can snap into stubout brackets.
	NailTites NailTites are used to hold Onix and PEX wherever a staplegun cannot get into a tight area. These NailTites are strong and easy to use. They work for 3/8” Onix, and 3/8”, 1/2” PEX, or 1/2” RadiantPEX-AL.
	Onix Unwinder Watts Radiant’s Onix Unwinder allows Onix coils to be quickly and easily unwound for easier and faster hose layout on the jobsite. The center post allows the Onix coil to move around without sliding off the Unwinder. Heavy-duty ball-bearing construction means years of use and easy turning.
	PEX CinchTool PEX connections take only seconds with the CinchTool. Great for those hard-to-reach spaces. Ratchet design releases only when the CinchClamp tab is properly pinched, thus ensuring a leak-proof connection. No gauging or tool calibration necessary. Meets ASTM F-2098 specifications. Note: Do not use for press fittings or RadiantPEX-AL tubing as the connection will leak
	PEX Unwinder Our PEX Unwinder handles all sizes of coils. The coil sits on the tripod and is held in place as it unwinds with four guide-bars. The PEX feeds through a guide-ring on top of the unwinder. The PEX Unwinder comes complete with two hold-down arms.
	Professional Tubing Cutter s Professional Tubing Cutter cuts tubing to length. This cutter is made of all-metal, heavy-duty construction and is designed for the rigors of daily jobsite use.
	RadiantPEX-AL Internal Spring Benders
	RadiantPEX-AL manual PressAll Tool Extra Jaws RadiantPEX-AL manual PressAll Tool Extra Jaws — for PressAll Tool Kit
	RadiantPEX-AL Manual PressAll Tool Kit RadiantPEX-AL Manual PressAll Tool Kit — for stainless pressing steel sleeves over 19" RadiantPEX-AL tubing and fittings PressAll Tool Kits include press tool, jaws, and adjustment tools all packaged in a sturdy blue plastic case.
	RadiantPEX-AL Pipe Reamers (Plastic reamer and T-reamer)
	RadiantPEX-AL Press Power Tool Jaws Power Tool RadiantPEX-AL Press Jaws are used for pressing RadiantPEX-AL composite tubing and fittings. Do not use them for crimping PEX tubing and fittings with copper crimp rings. Press jaws are available for 1/2” through 1” sizes of RadiantPEX-AL tubing and fittings. These jaws fit our REMS Akku-Press and PowerPress-E power tools, as well as Ridgid 300-E and CT400 power tools. They do not fit the Ridgid 100-B power tool.
	RadiantPEX-AL Universal Bending Tool Universal PAP Bending Tool Note: This tool bends all sizes of RadiantPEX-AL.
	RadiantPEX Crimping Power Tool Jaws Power Tool RadiantPEX Crimp Jaws are used for crimping PEX tubing and fittings with copper crimp rings. Do not use them for pressing RadiantPEX-AL tubing and fittings with stainless steel press sleeves. Jaws are available for 3/8” through 1-1/4” sizes of PEX and fittings. These jaws fit our REMS Akku-Press and PowerPress-E power tools, as well as Ridgid 300-E and CT400 power tools. They do not fit the Ridgid 100-B power tool.
	Ratcheting PEX CinchTool Use the new heavy-duty Ratcheting CinchTool to cinch all sizes of stainless steel Cinch Clamps. This is the best tool for 3/4” and 1” Cinch Clamps. Cinches can be done with one hand (you may need two hands for 1” clamps). Just squeeze the tool until the indicator window shows the connection is complete. Then release the quick-release knob. It’s that simple. The tool comes complete with holster and adjustment tools. Note: Do not use for press fittings or RadiantPEX-AL tubing as the connection will leak.
	Replacement CrimpAll and RingMaster Parts Replace or enhance your arsenal of crimping tools with these CrimpAll or RingMaster components. The 3/8”, 1/2”, 5/8”, and 3/4” jaws fit only the 15” tool; 1” jaw fits only the 19” tool. Use these jaws only for crimping RadiantPEX or WaterPEX. Do not use for RadiantPEX-AL.
	Replacement PEX Unwinder Hold-down Arms These Replacement Hold-down Arms keep the coil of PEX in place as it is unwound for use. Sold as a pair. SOLD AS A PAIR.
	Single-Track Railway The Single-Track Railway securely holds Onix and PEX where rewire or rebar are not used. Applications include concrete slabs, thinslabs, sand beds, and subgrade gravel layers. The Single-Track Railway is sold in 13’ lengths. With break points every 2”, you have many tube spacing choices. This Railway makes pipe installation a “snap!” Allows tube spacing at 6”, 8”, 10”, 12”, 14”, 16”, or 18” on center.
	SqueezeTite Pliers This SqueezeTite Pliers are locking caliper pliers that allow worry-free handling of all sizes of our SelfTite clamps. This uniquely designed tool prevents the SelfTite clamp from accidentally sliding free, as could happen with a standard pair of pliers or channel locks. With SqueezeTite Pliers, SelfTite clamps can be locked in the open position, freeing both hands to secure the Onix to the barb.
	Stamped Aluminum PEX Plates Plates are the traditional way to install RadiantPEX or RadiantPEX-AL in underfloor and sandwich applications. These plates are a stamped aluminum plate measuring 5” x 24”. You’ll need about four plates per 10’ of tubing. Follow our Installation Guidelines very carefully when using these plates. See our LockDowns for an alternative fastener for underfloor PEX applications.
	Staple Guns Watts Radiant Staple Guns are professional tools that do an excellent job stapling Onix RadiantPEX and RadiantPEX-AL(PAP) in both Staple-Up and thinslab projects. You can get them in the traditional hand-held form or with a convenient adjustable length Extension Arm.
	Terminal Bend Supports Terminal Bend Supports — for transitioning and protecting radiant tubing at ends Terminal Bend Supports are plastic elbows that are used near the completion of PEX circuits to help the tubing make smooth transitions out of the slab and up to the manifolds.
	Triple-track Railway The Triple-Track Railways securely hold several sizes of radiant tubing where rewire or rebar are not used. Use triple-tracks for: 3/8” Onix; 3/8”, 1/2”, and 5/8” RadiantPEX; and 1/2” and 5/8” RadiantPEX-AL Applications include concrete slabs, thinslabs, sand beds, and subgrade gravel layers. Triple-Track Railways are sold in 4’ lengths. Triple- Track Railways allow almost any spacing you may need — 6”, 9”, 12”, 15”, or 18”.
	UnderFloor LockDown Our LockDown fastener is designed specifically for under-floor PEX applications. Its loose hold allows PEX to move during expansion and contraction of the tubing. The LockDown won’t pop open like other similar clips you may have seen or tried. Use LockDowns for attaching 3/8” or 1/2” PEX; do not use it for 5/8” PEX as it will fit too tightly. Order five LockDowns for 10’ of PEX. Follow all Installation Guidelines carefully.

See our MasterHEAT Pricing page for itemization & ordering information