Troubles Melt Away!

Minimize accidents • Reduce slips and falls on ramps, steps and entrances. • Reduce “tracked-in” ice, snow and water. • Reduce auto accidents on ramps, entrances and parking lots.	Prevent damage • Save concrete, floor coverings, landscaping and auto paint from the effects of salt. • Protect concrete, stone and brick from snow plowing. • Avoid damage to landscaping from snow plowing. • Prevent damage to overhead doors from ice related “freeze-ups”.	Save time and money • Save time lost shoveling walks and drives. • Save time lost clearing loading docks. • Save money not spreading salt.

MasterHEAT Snow Melting accessories:
	MasterHeat Contactor Pro: 50/ 100/ 200 amp panels The Contactor Pro panels are complete "turn-key" solutions for activating larger systems of MasterHeat Mats and Cables when used in combination with a PM-224, PM-824, or PM-HSC5 snow detector. They’re available in three panel sizes: 50 Amps, 100 Amps, and 200 Amps. An additional 200-amp extension panel allows coverage for even larger systems. 120V, 208V, 240V, or 270V is supplied to the panel and a 24V Class 2 transformer allows connection to the snow detector. Each Contactor Pro panel is complete with "system on" indicator light, manual override by a 4-hr timer, simple 24V wire terminal connections to the snow detector, and outputs for connection to an extension panel. The CP-50 has one 50-amp contactor, the CP-100 has two 50-amp contactors, and the CP-200 has four 50-amp contactors. Systems should be designed to connect one or more MasterHeat Cables or Mats in combinations not to exceed the capacity of individual 50-amp contactors. Each panel is NEMA Type 1 for mounting indoors on a wall, has knockouts for conduit, and measures 12" x 12" x 4".
	MasterHeat Display Panel, PM-DP, 24V, Optional A recommended upgrade to the PM-2B is our PM-DP Control Panel. This control allows convenient ndoor monitoring and control of the system for manual on, automatic, and standby operation. It ommunicates with the PM-2B through a simple low-voltage cable.
	MasterHeat PM-224 Detector, 240vac The PM-224 and PM-824 are used to detect snowfall and low temperature to activate the MasterHeat Mats or Cables. The PM-224 has a moisture sensor "fixed" to the top. The PM-824 has a remote moisture sensor, which allows mounting the control in a more convenient location. It can be mounted on a wall or inside the building and the sensor outside exposed to the snowfall, adding convenience of operation and adjustment. Both models offer automatic activation, rain/snow detection, adjustable trigger temperature, and a drying cycle, as well as "manual on" operation. Either control will operate in conjunction with our Contactor Pro series of MasterHeat controls, which should be ordered separately (see next page). The unit measures approximately 5" x 7" x 3".
	MasterHeat PM-824 Detector, 240vac The PM-224 and PM-824 are used to detect snowfall and low temperature to activate the MasterHeat Mats or Cables. The PM-224 has a moisture sensor "fixed" to the top. The PM-824 has a remote moisture sensor, which allows mounting the control in a more convenient location. It can be mounted on a wall or inside the building and the sensor outside exposed to the snowfall, adding convenience of operation and adjustment. Both models offer automatic activation, rain/snow detection, adjustable trigger temperature, and a drying cycle, as well as "manual on" operation. Either control will operate in conjunction with our Contactor Pro series of MasterHeat controls, which should be ordered separately (see next page). The unit measures approximately 5" x 7" x 3".
	MasterHeat PM-HSC5 Slab Detector, 24vac The PM-HSC5 is a slab-mounted snow detector. It is used to detect snowfall and low temperature to automatically activate the MasterHeat Mats or Cables. It has built-in temperature and moisture detection and a drying cycle after snow melting is complete. It is comprised of a sensor and sensor socket that is embedded in the slab where MasterHeat is installed. This sensor operates in conjunction with our Contactor Pro series of MasterHeat controls, ordered separately.
	MasterHeat, PM-2B, Detector, 120/208/240vac The PM-2B sensor control is used to detect snowfall and low temperature to activate the MasterHeat Mats or Cables. It is a "pole-mounted" control with a "fixed" moisture sensor mounted to the top. The PM-2B offers automatic activation, rain/snow detection, adjustable trigger temperature, and a drying cycle, as well as "manual on" operation. It operates on line voltage (120/208/240V, not 277V) and has a 30 Amp capacity. It is a stand-alone control intended for relatively small systems (up to 30 Amps). It should not be used with our Contactor Pro series of MasterHeat controls, as those are designed for 24V control sensors. The unit measures approximately 5" x 7" x 3". A recommended upgrade to the PM-2B is our PM-DP Control Panel. This control allows convenient indoor monitoring and control of the system for manual on, automatic, and standby operation. It communicates with the PM-2B through a simple low-voltage cable.
	Snow Melting Plaque Permanent plaque to indicate where a snow melting system has been installed.

See our MasterHEAT Pricing page for itemization & ordering information